Fujipla ALM3230 Auto Laminator

Labor-free automation with feeding, laminating, and trimming at the touch of a button! • Heated rollers for crystal clear scratch-free lamination • Adjustable trim for full encapsulation or precise flush cut • Sits on a tabletop or optional stand • Green Button Operation: touch the button and walk away for labor-free, fully trimmed and laminated sheets • ASAP adhesive laminating films in 1.5, 3, and 5 mil, gloss, matte, and Elegant Silk Matte adheres to hard-to-laminate digitally printed sheets Eliminate time-consuming, costly hand feeding FujiPla ALM 3230 Automatic Laminator

• Heated rollers for crystal clear scratch-free lamination
• Adjustable trim for full encapsulation or precise flush cut
• Sits on a tabletop or optional stand
• Green Button Operation: touch the button and walk away for labor-free, fully trimmed and laminated sheets
• ASAP adhesive laminating films in 1.5, 3 and 5 mil, gloss, matte and Elegant Silk Matte adheres to hard-to-laminate digitally printed sheets
  
  
  Key Features:
• Small Foot Print – less than 4 sq. ft.
• Table Top or optional stand with locking roller casters
• 115 Volt, 15 amp service with economy mode
• Ultra quick warm up of less than 5 minutes
• Virtually Unattended Operation
• Digital Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 8.5”x11”
• Laminates copy paper up to 100lb cover stock
• Automatic two side lamination or short one side work
• Adjustable Automatic Flush or Sealed edge trim
• 1 year parts and labor warranty
  Labor-free automation with feeding, laminating, and trimming at the touch of a button!
  
  
  Model ALM 3230
• Laminating Speed: Fixed speed at 40”/min.
• Temperature Range: 170-270°F
• Ultra Fast Warm-Up Time: Approximately 5 minutes
• Film Thickness: 1.5, 3, and 5 mil
• Thickness of Objects: 20lb bond - 100lb cover
• Paper Feeding Capacity: 100 Sheets
• Adjustable Paper Guide Applicable Sizes: Letter Paper Size 8½” x 11” Tabloid Paper Size 11” x 17” Digital Paper Size 12” x 18” Digital Paper Size 13” x 19”
• Trimming Methods (2 modes): Flush trim or edge seal for all 4 sides of the print
• Operation Panel LCD display for start, stop, temperature, and trim settings, leading and trailing edge side cuts are adjustable
• Other Features Laminated sheet counter, Film tension control, Roller gap lever, Paper thickness feeder adjustment lever
• Power Consumption: 900W
• Power Supply: AC 120V (60Hz)
• Net Weight: Laminator: 100 Lbs. Stand: 48.5 Lbs.
• Optional Accessories: Rolling Stand
  
  
• Other Features
• Laminated sheet counter,
• Film tension control,
• Roller gap lever,
• Paper thickness feeder adjustment lever
• Power Consumption 900W
• Power Supply AC 120V (60Hz)
• Net Weight Laminator 100 Lbs.
• Optional Stand: 48.5 Lbs.
• Optional Accessories Rolling Stand
  
  
• ALM Exclusive ASAP Roll Film
• Perfect for Digital Print technology
• Anti-static properties ALM Exclusive ASAP Roll Film 
  1.5mil, 12.6” x 984 ft 
  3.0mil, 12.6” x 492 ft 
  5.0mil, 12.6” x 328 ft 
  1.2mil, 12.6” x 984 ft, One Side Nylon set (Gloss & Matte Versions)